06. June 2019 · Comments Off on How I Became An Expert on · Categories: Financial

The Benefits of Water Jet Cutting

The usefulness of hydro-cutting will soon transform it into a billion dollar industry. The reasons for this is that water jet cutting is becoming a staple for precision part manufacturing and intricate artwork. If you want to know how water jet works and its advantages, then you should read below.

A pump and a nozzle are the basic parts in a water jet. There are two kinds of cutting that can be performed by these machines. One of these is pure water jet cutting. These use extremely high pressures to be able to cut through softer materials. Materials like non-ferrous metals, textiles, and wood can be cut with high water pressure. Precise cutting of materials is possible with the use of a thin stream of water, combined with extreme pressure.

Abrasive cutting is another kind of cutting. The nozzle is modified and an abrasive material is used to cut through harder materials. This abrasive combines with the stream of flowing water in a nozzle. Small particles are removed by the abrasive compound while they are washed away by the water.

The most common abrasive material use is almandine garnet but there are harder abrasive required for some materials. You can cut hardened steel, ceramics, and even some with abrasive water jets. With specialized controls, titanium can also be precision machined.

A lot of changes has been done to the intense process over the years. Learning about the types of heads that are currently available through manufacturers is possible.

Below are some of the benefits of using water jets compared to other cutting processes.

The reduction of material waste due to the use of an extremely thin stream of water is one of its benefits. In the aerospace industry, this benefits help reduce the cost of building individual parts over time.

Post-cutting finishing is minimized. The material does not warp and it has a smooth edge and this is why you don’t really need to apply finishing.

If you use the correct abrasive compound, abrasive water jets can be used to cut through any material. They can cut thicker materials than you would be able to with other forms of cutting.

Modern water jets are environmentally friendly. When you cut with water jet you don’t use much water and there are no hazardous waste during the cutting process.

The use of water jets is only when it is completely necessary. You can use in it artistic applications and parts which require extreme precision.

It is the only process available which can allow you to CnC some materials. Stone simply can’t be cut with the majority of industrial cutting techniques.

Precision is very important in aerospace and automotive industries, and water jet cutting is very important in these industries.

Exotic materials like titanium can be cut in bulk.

Water jet brings to speed known long-term processes.

Comments closed.